Build Your Own Beer Bong
Beer bongs are a great addition to any party. If you don't have one made up you can usually make a quick beer bong out of parts from around your house.
Product Information
If you are a bit short on money and can’t afford a small amount or don’t have the time to go to a hardware store, then this free guide can help you quickly throw one together.
Just follow the steps; the best way to build a cheap quick beer bong is to use everyday items around the house so if you don’t have the items what we use in this guide then use something familiar.
Materials
- A Soft drink bottle (1.25ltr or bigger)
- A piece of hosing
- Tape or a clamp
Steps
- Using scissors cut the top end of the soft drink bottle so you have a funnel shape with the lid off.
- Grab a garden hose or any hosing which will fit around the spout of the funnel the better the fit the less likely of a leak.
- Place the spout of the coke bottle inside the hosing or the best you can do either using tape or a clamp try and produce the best seal possible.
- Test it out by making a kink in the hosing and fill it up. Once you have filled it to the desired amount, place your mouth over the hosing and undo the kink and allow the goodness or your brew or commercial brew flow
Now this a very rough and probably not too hygienic design, I would strongly recommend buying a beer bong if you don’t have any time constraints, These beer bong designs are very affordable and very good looking.
- Always drink in moderation and don’t overdo your consumption of alcohol, Binge drinking ends with health problems, embarrassment and mental problems.
- Enjoy a few drinks have a laugh but don’t overdo it.
If you wish to copy this guide please link back to us in exchange,
Thanks,
Buy Brew Equipment.
Great Deals
